
All Glass Heat Pipe Solar Evacuated Tube for Solar Thermal Collector
Heat pipe collectors are highly efficient, easy to install, suitable for cold areas, and are welcomed by consumers.
We have many years of R&D and manufacturing experience in the field of heating solar collector, flat solar collector, family use solar water heater, and can improve the most cost-effective products for you. We hope to establish the concept of collaboration, aggregate our strengths, and burst into synergy to form a strong development momentum. The company will continue to improve its scientific and technological strength, enhance product quality, improve the marketing network, establish a sound after-sales service system, and comprehensively strengthen corporate brand building. In order to further improve the structure and level of the talent team, the company constantly strengthens the training and education for employees, thus effectively maintaining the passion and vitality of the organization. We combine the opinions of customers and the needs of the company for products, and constantly improve the production process, and strive to make customers 100% satisfied.
DESCRIPTION
1. Vacuum tube heat pipe solar collector is a heating device that converts sunlight energy into heat energy, and heats water from low temperature to high temperature to meet people's hot water use in life and production. The energy-saving cost of solar energy is higher than that of gas water heaters and electric water heaters, which can reduce the daily expenses of users.
2. At present, the service life of the main components of solar energy can reach more than fifteen years, and the long-term maintenance and maintenance service life is even longer.
3. As a new energy water heater product, solar energy has no hidden safety hazards during operation, no environmental pollution, no toxic and harmful gases, and high safety performance.
4. Solar energy has a long warranty period. If parts or accessories are damaged, they can be reissued and replaced in time. There is no need to worry about maintenance costs, which are usually included in the service period.
5. Solar energy has good heat preservation performance and good heat storage effect, which can meet the needs of multiple people using water at the same time, and it can also be used for bathing the next day.

FEATURES
Heat pipe solar collector is composed of manifold, installation frame, vacuum tube and heat pipe
Efficiency rate is higher than flat panel solar collector
Easy for installation
Suitable for cold areas because there is no water in vacuum tubes
Sloped roof

Flat roof

APPLICATIONS
● Home
● Factory
● Hotel
● Hospital
SPECIFICATIONS
Manifold Casing Material | Aluminium (grade 3A21) |
Frame Material | 6063 Aluminum Alloy(1.8mm) |
Header Pipe Material | 99.93% pure Copper & lead free 45% silver brazing |
Heat pipe Specification | Thickness:0.6mm,14mm condensor,(24mm condensor optional) |
Fins around heat pipe | Double round aluminum 1.68m |
Insulation | Compressed Glass Wool - K = 0.041W/mK |
Rubber Seals and Rings | HTV grade silicone rubber |
Optimal installation angle | 20-70° Vertical, -5° to +5° Horizontal |
Maximum Operating Pressure | 8 Bar-16psi |
Optimal flow rate | 0.1L/min/tube - 0.026G/min/tube |
ADVANTAGES
1. High thermal efficiency
Using high-performance selective absorption coating and high thermal conductivity heat pipe, the heat gain is large, the heat loss is few, and the heat collection is much higher than flat panel under the same conditions;
2. Operation under pressure
The rated pressure bearing capacity is 6kgf/cm2, which is especially suitable for huge heat collection projects with forced circulation;
3. Stable output in Winter
There is no water in the tube, it starts quickly and runs all year round. Compared with the non pressure vacuum tube solar collector, heat pipe generates 20-30% more hot water;
4. No over heat in Summer
No reflector is needed to prevent high water temperature and small wind load in summer, and the efficiency of the collector will not be affected due to the performance degradation of the reflector;
5. Small footprint
The vacuum tubes are densely packed, the size of the collector is small, and the installation area is reduced;
6. Easy installation and maintenance
The copper casing is dry-plugged connection, which is easy to install, and the condensation end of the heat pipe is free of scale and hidden danger of water leakage.
7. Long lifespan
High-efficiency and qualified heat pipe, strict production process control, normal service life of more than 15 years.
CERTIFICATE

FAQ
Q8:What are your main products?
A:heat pipe solar collector, solar water heater, pvt solar panel
Q9:What is your terms of delivery?
A:FOB or CIF
Q10:What kind of files do you accept ?
A:PDF EXCEL
Q11:What's the MOQ for your production?
A:Generally, there is no MOQ for our products.
Q12:What's your payment term?
A:L/C at sight or bank T/T
Q13:When can I get the price?
A:We will provide quotation within 36 hours
Q14:Where is your company?
A:Our company is located in Haining City, Zhejiang Province, China
The company will adhere to the cooperation concept of "integrity is the cornerstone, win-win is the driving force, unity and cooperation is the road", and cooperate with well-known domestic and foreign companies to achieve win-win development and achieve the goal of "creating a pioneer in the domestic All Glass Heat Pipe Solar Evacuated Tube for Solar Thermal Collector industry. , To make greater contributions to the promotion of my country’s All Glass Heat Pipe Solar Evacuated Tube for Solar Thermal Collector industrial development. We insist on people-oriented, attracting and retaining talents with an affable cultural atmosphere. We adhere to the sustainable development strategy focusing on the comprehensive promotion of circular economy to enhance the operation and management level.
You Might Also Like
Send Inquiry









