
10, 12, 18, 24, 30PCS Pressurized Heat Pipe Evacuated Tube Solar Collector with Borosilicate Glass 3.3, &14mm Condensing, & 24mm Heat -Transfer End
Heat pipe collectors are highly efficient, easy to install, suitable for cold areas, and are welcomed by consumers.
We continue to innovate, provide consumers with quality Copper Coil Solar Water Heater, Solar Hybrid Pvt, work staiton and excellent service, and contribute to the well-being of people's lives. The company's good supporting facilities and development environment have laid a good foundation for high-quality products. With excellent products, high quality service and sincere attitude of service, we ensure customer satisfaction and help customers create value for mutual benefit and create a win-win situation. Our company adheres to the business philosophy of honesty and professionalism, and is dedicated to providing every customer with the fastest and most efficient service. We will make full use of the favorable conditions of the capital market and the broad space for development, and continue to be stronger and better.
solar thermal collector with 12 heat pipes and vacuum tubes
Heat pipe solar collectors are made of high quality materials
1.The selective absorber coating on the inner cover of the vacuum tube absorbs the solar energy, which is then converted into heat energy and transferred to the heat pipe through the aluminum fins.
2.The heated liquid in the heat pipe becomes steam and rises to the top condenser, and then the heat transfer liquid passes through the heat exchanger, and the cooled steam becomes liquid and returns to the bottom of the heat pipe.
3.Thermal energy is conducted through the copper tubing to transport the liquid. The transfer of this heat to the liquid creates a continuous cycle as long as the collector is heated by the sun.

FEATURES
Heat pipe solar collector is composed of manifold, installation frame, vacuum tube and heat pipe
Efficiency rate is higher than flat panel solar collector
Easy for installation
Suitable for cold areas because there is no water in vacuum tubes
solar collector manifold

solar heat pipe

solar vacuum tube


APPLICATIONS
● Home
● Factory
● Hotel
● Hospital

SPECIFICATIONS
Manifold Casing Material | Aluminium (grade 3A21) |
Frame Material | 6063 Aluminum Alloy(1.8mm) |
Header Pipe Material | 99.93% pure Copper & lead free 45% silver brazing |
Heat pipe Specification | Thickness:0.6mm,14mm condensor,(24mm condensor optional) |
Fins around heat pipe | Double round aluminum 1.68m |
Insulation | Compressed Glass Wool - K = 0.041W/mK |
Rubber Seals and Rings | HTV grade silicone rubber |
Optimal installation angle | 20-70° Vertical, -5° to +5° Horizontal |
Maximum Operating Pressure | 8 Bar-16psi |
Optimal flow rate | 0.1L/min/tube - 0.026G/min/tube |
ADVANTAGES
high performance
The temperature-controlled solar heat pipe adopts a heat transfer method different from the traditional copper water heat pipe, and the heat transfer capacity of a single heat pipe is not limited, which can meet the large heat transfer requirements of CPC solar collectors.
longevity
The internal pressure of the temperature-controlled solar heat pipe is positive pressure (that is, higher than atmospheric pressure), there is no life problem caused by the reduction of vacuum degree, and the effective life of the product is more than 15 years.
Intelligent temperature control
The traditional gravity solar heat pipe has no temperature control mechanism and cannot solve the system overheating problem at the engineering application level.
Therefore, in practical engineering applications, when there is too much heat, the pressure can only be released through the pressure relief valve, or the heat collection area can be artificially reduced by covering.
The temperature control solar heat pipe has intelligent temperature control function. The maximum temperature of the hot water in the solar system water tank can be controlled at 80℃.
No installation angle restrictions
The temperature-controlled heat pipe solar collector has no restrictions on the installation angle.
The angle of the heat pipe is between 0° and 180°, which can conduct unobstructed conduction.
Solar collectors can be installed vertically or horizontally.
Can replace U-tube solar collectors and horizontal heat pipe solar collectors.

ADVANTAGES

FAQ
Q15:Where is your loading port?
A:Shanghai or Ningbo
Q16:How soon we can get email response from your team?
A:We will respond within 24 hours.
Q17:If we have some other product requirements that your page don't include, can you help to supply?
A:Yes, we are happy to search,advise,buy and ship for your convenience
Q18:What's the list of certificates you holds?
A:ISO EN12975
Q19:Are you in stock?
A:Yes, there are multi-models of solar products in stock
Q20:Does your product have warranty service? How long is the warranty period?
A:10 years after installation
Relying on a strict quality management system and an enterprising spirit, we have now become a supplier of high-quality 10, 12, 18, 24, 30PCS Pressurized Heat Pipe Evacuated Tube Solar Collector with Borosilicate Glass 3.3, &14mm Condensing, & 24mm Heat -Transfer End in China. We practice a balanced and sustainable business philosophy with a corporate image of high ambition and down-to-earth. We uphold the spirit of integrity, responsibility and innovation, follow the latest development trends, and constantly improve the company's service level and operating performance with outstanding talents, advanced technology, and scientific management, and strive to become a respected and leading enterprise in the industry.
You Might Also Like
Send Inquiry








