Pressurized Glass Evacuated Tube Heat Pipe Solar Collector

Pressurized Glass Evacuated Tube Heat Pipe Solar Collector

The thermosyphon solar water heater provides warm water through a high-efficiency copper coil heat exchanger in the water tank. When cold water passes through the copper tube, it achieves the heating effect by absorbing heat from the copper oil.
Send Inquiry
Product Introduction

On the basis of product management, we also take building a brand as our own responsibility and develop new solar geyser installation, vacuum tube solar collector system, Flat Plate Pressure Solar Water Heater. We constantly listen to and meet user needs, guide and exceed them, and win their respect by enhancing our brand image. We are well aware that internationalization is the inevitable trend of the development of service enterprises. We pay attention to environmental protection, energy conservation and emission reduction, and realize the harmonious development of enterprises and nature. We respect labor, knowledge and talent, and set compensation by contribution and treatment by value.

DESCRIPTION

Pre-heated solar water heater

1. Material of Inner Tank: SUS304-2B Stainless Steel, thickness: 0.4mm, 0.5mm, 0.6mm

2. Material of Outer Tank: SUS3042B/BA , thickness: 0.31mm/0.4mm

3. Copper Coil: Diameter: 12mm, thickness: 1mm

4. Heat Preservation: Polyurethane foam with 55mm thickness

5. Magnetic-controlled Al-N-Al splash all glass evacuated heat-collecting tubes

6. Specification: Φ 58mm*1800mm

7. Material of Support: galvanized steel, thickness: 1.2mm/1.5mm or stainless steel

8. Capacity: 100L-300L

Pre-heated solar water heater working Principle

1. The vacuum tube collector absorb the heat energy to heat the water in heat storage tank.

2. When using the hot water, the cold water flows through the inlet, the copper coil absorb the heat then transfer into the cold water, so that the temperature rise up ceaseless.

3. For the original features of the copper coil, the water temperature of the outlet is close to the water temperature of the water tank(≤ 3C), so the high pressure of the cold water into the copper coil and absorb the temperature, at last the water can be used.



Reference photo

7.4.1(001)

SPECIFICATION SHEET

Weight

65kg

Weight with water loaded

215kg

Water capacity in water tank

150Liter

Water capacity in 15 tubes

42Liter

Water capacity in total

192Liter

Inner tank

stainless steel 304-2b , diameter 360mm

Outer tank

galvanized steel,diameter 460mm

Bracket

galvanized steel, 7cm wide 45°

Vacuum tube

borocilicate glass grade 3.3 1.6mm 3 layers coating with copper, aluminium and stainless steel

Package

sea worthy carton, print customer brand logo

Steel cutting machineTank straight welding machine
330-330 (1).jpg2-330 (2).jpg
Tank inspection machineTank storage warehouse
2-330 (3).jpg2-330 (4)(001).jpg
Vaccum tube 3 layers coatingHeat pipe coil
2-330 (5)(001).jpg330-248.jpg

Warehouse Storage

1 (6)

Advantages:

1.Taking advantage of tap water's pressure, hot water with pressure makes you comfortable when you have bath

2.Multifunction:Bathing, washing

3.Low operating cost, one time investment, and permanent benefit.

4.Long heat preservation hours: 72 hours

5.Installation and maintenance are easy

The quality of our Pressurized Glass Evacuated Tube Heat Pipe Solar Collector is just as good, but our products are more competitively priced because of our low labor and raw material costs. The management methods adopted by our company, strict quality control system and good after-sales service team have created good conditions for our products to enter the world market. Change and innovation is to improve the corporate governance structure, establish and improve the management system with clear hierarchy and clear responsibility.

Send Inquiry

whatsapp

Phone

VK

Inquiry