
JNGE Factory Price 150AMP Solar Charge Controller 48V Higher Quality and Durability
As a manufacturer engaged in Preheating Solar Water Heater, solar hot water panels, Solar Water Heater Panel for many years, we have been working hard to explore and research, and develop new products suitable for national standards. With the optimization of enterprise management and the continuous improvement of the company's comprehensive quality, it effectively promotes and promotes the sustained and rapid growth of the overall economic benefits of our company. Our core values: advance with the times, win-win with customers and share with employees. We have an important influence in the industry, which provides a strong guarantee for the steady improvement and high-quality development of the enterprise.
Photovoltaic Thermal Hybrid Solar Collector
Photovoltaic thermal collectors, typically abbreviated as PVT collectors and also known as hybrid solar collectors, photovoltaic thermal solar collectors, PV/T collectors or solar cogeneration systems, are power generation technologies that convert solar radiation into usable thermal and electrical energy. PVT collectors combine photovoltaic solar cells, which convert sunlight into electricity, with a solar thermal collector, which transfers the otherwise unused waste heat from the PV module to a heat transfer fluid. By combining electricity and heat generation within the same component, these technologies can reach a higher overall efficiency than solar photovoltaic (PV) or solar thermal (T) alone.
Significant research has gone into developing a diverse range of PVT technologies since the 1970s.The different PVT collector technologies differ substantially in their collector design and heat transfer fluid and address different applications ranging from low temperature heat below ambient up to high temperature heat above 100 °C.
FEATURES
The front of the PVT heat pump panel (in short PVT panel) consists of solar cells (PV) that convert sunlight into electricity. The back side is a thermal heat exchanger (T) that provides the source energy for the special PVT heat pump. The PVT panel extracts energy from the air, from sun and from daylight. Heating with Triple Solar PVT panels is the sustainable and maintenance free solution for fossil free heating.

Mechanical Features
Cell Type | 166*83 Mono |
No. of Cells | 144(6*12)*2 |
Dimensions | 2094*1038mm |
Weight | 37.5kg |
Front Glass | 3.2mm high transmission, low iron, tempered glass |
Frame | Anodized Aluminium Alloy |
Junction Box | IP68 3 diodes |
Output Cables | 4mm² cable 30cm+mc4 |
Max Wind Load/Snow Load | 2400Pa/5400Pa |
Specification Sheet
STC: Irradiance 1000 W/m², AM 1.5, Gand Cell Temperature of 25℃ | |
Module Type | M16Ensun |
Heat Generation(W) | 1200 |
Peak Power(Pmax) | 450.00 |
Maximum Power Voltage(Vmp) | 41.50 |
Maximum Power Current(Imp) | 10.85 |
Open Circuit Voltage(Voc) | 49.30 |
Short Circuit Voltage(Isc) | 11.60 |
Cells Efficiency(%) | 23.36 |
Module Efficiency(%) | 20.70 |
STC: Irradiance 800 W/m², AM 1.5G, Ambient Temperature 20℃, Wind Speed 1m/s | |
Peak Power(Pmax) | 336.00 |
Maximum Power Voltage(Vmp) | 38.60 |
Maximum Power Current(Imp) | 8.70 |
Open Circuit Voltage(Voc) | 46.20 |
Short Circuit Voltage(Isc) | 9.38 |
Inlet and Outlet | DN 15 |
Water Pressure | 0.8mpa |
Water Flow | 0.4L/S |
Temperature Characteristics
NOCT Nominal Operating Cell Temperature(℃) | 45±2 |
Pmax Temperature Coefficients(W/℃) | -0.350% |
Voc Temperature Coefficients(V/℃) | -0.270% |
Isc Temperature Coefficients(A/℃) | +0.048% |
PVT Operating Conditions
Maximum System Voltage(V) | 1500 |
Maximum Series Fuse Rating(A) | 20 |
Power Tolerance | 0~+3% |
Operating and Storage Temperature(℃) | -40~+85 |
PVT Certification
IEC61215, IEC61730, ISO900I:2008 TUV CE ISO SON PV CYCLE
Quality Warranty
quality assurance for 10 years,
90% power output for 12 years,
80% power output for 25 years.
Payment Term
30% deposit,
70% balance to pay before containers arrive in the destination port.
T/T, L/C, cash, and Alibaba assurance payment are acceptable.
COMPONENTS

Storage Tank - with non pressure type and high pressure type

Controller with digital function

Water Pump-lift should be over 20miter

Bracket -optional as per your need

Electric Heater -optional 6kw 9kw 12kw 20kw

Inverter -optional as your need.
Client can purchase in local market if available

FAQ
1.Where is your factory located?
In Haining City,Zhejiang Province,China.
about 2 hours drive from shanghai airport
about 1 hour drive from hangzhou airport
2.When did your factory established?
Since 2009 , in 2020 we are running 2 factories both non pressure and high pressure
3.What is your main market?
North America, South America, Africa and Middle East
4.How many square meters of your factory?
More than 30000 square meter.
5.How many workers in your factory?
20 workers in office
80 workers on production line.
6.What type of your product?
Ensun Solar is top manufacturer and exporter of solar water heater
7.Where is your product use in?
Solar farm
hot water system
hot air heating
homeuse solar water heating
8.Can you customize for clients?
Yes, we can customize as your need, we have R&D department,
our designers can make design for you and our technicians make prototype.
9.Do you have booth in shows?
Yes, we have booth in every Canton Fair and online Canton Fair
Also some oversea exhibitions in Asia, America and Africa.
10.What is the delivery time for mass production?
Normally 14 days after deposit
It is negoticable as per client container plan
PVT collectors combine the generation of solar electricity and heat in a single component, and thus achieve a higher overall efficiency and better utilization of the solar spectrum than conventional PV modules.
Utilization of solar spectrum of a PVT collector
Photovoltaic cells typically reach an electrical efficiency between 15 % and 20 %, while the largest share of the solar spectrum (65 % - 70 %) is converted into heat, increasing the temperature of PV modules. PVT collectors, on the contrary, are engineered to transfer heat from the PV cells to a fluid, thereby cooling the cells and thus improving their efficiency.In this way, this excess heat is made useful and can be utilized to heat water or as a low temperature source for heat pumps, for example. Thus, PVT collectors make better use of the solar spectrum.
Most photovoltaic cells (e.g. silicon based) suffer from a drop in efficiency with increased cell temperatures. Each Kelvin of increased cell temperature reduces the efficiency by 0.2 – 0.5 %.Therefore, heat removal from the PV cells can lower their temperature and thus increase the cells' efficiency. Improved PV cell lifetimes are another benefit of lower operation temperatures.
This is an effective method to maximize total system efficiency and reliability, but causes the thermal component to under-perform as compared to that achievable with a pure solar thermal collector. That is to say, the maximum operating temperatures for most PVT system are limited to less than the maximum cell temperature (typically below 100°C). Nevertheless, two or more units of heat energy are still generated for each unit of electrical energy, depending on cell efficiency and system design.
In the future, our company will continue to adhere to the business philosophy of professional construction and standardized management, regard product quality as its life, and actively research and develop new products. And to cooperate extensively with friends from all walks of life with a sincere attitude, mutual benefit and make greater contributions to the promotion of traditional culture and the development of JNGE Factory Price 150AMP Solar Charge Controller 48V Higher Quality and Durability career. We are creating a work environment where everyone feels comfortable and inspired to contribute. In order to meet the needs of customers, we constantly introduce new materials, new structures, new applications, new specifications, and put them on the market in the form of series.
You Might Also Like
Send Inquiry








