192VDC 50A PWM Solar Panel Battery Intelligent Regulator Controller

192VDC 50A PWM Solar Panel Battery Intelligent Regulator Controller

Photovoltaic panel(450W Mono) is composted of eight layers: tempered glass, solar cells, EVA, seal board, heat conduct pipe, heat exchange plate, insulation and alloy frame.
Send Inquiry
Product Introduction

Our company not only provides high-quality solar air heating tube, small solar collector, Flat Panel Solar Water Heater for customers, but also provides a complete set of solutions and perfect after-sales service with the concept of 'professionalism and creativity' by taking advantage of its own resources and talents. We are able to recommend products that are appropriate for the actual use of our customers. We insist on taking economic benefits as the center, market demand as the guidance, and mechanism innovation and technological innovation as the driving force. Our company takes effective quality reward and punishment measures from the aspects of quality system construction, improving the quality awareness of all staff, and paying attention to on-site follow-up inspection.

Photovoltaic Thermal Hybrid Solar Collector

Photovoltaic thermal collectors, typically abbreviated as PVT collectors and also known as hybrid solar collectors, photovoltaic thermal solar collectors, PV/T collectors or solar cogeneration systems, are power generation technologies that convert solar radiation into usable thermal and electrical energy. PVT collectors combine photovoltaic solar cells, which convert sunlight into electricity, with a solar thermal collector, which transfers the otherwise unused waste heat from the PV module to a heat transfer fluid. By combining electricity and heat generation within the same component, these technologies can reach a higher overall efficiency than solar photovoltaic (PV) or solar thermal (T) alone.

Significant research has gone into developing a diverse range of PVT technologies since the 1970s.The different PVT collector technologies differ substantially in their collector design and heat transfer fluid and address different applications ranging from low temperature heat below ambient up to high temperature heat above 100 °C.

FEATURES

The front of the PVT heat pump panel (in short PVT panel) consists of solar cells (PV) that convert sunlight into electricity. The back side is a thermal heat exchanger (T) that provides the source energy for the special PVT heat pump. The PVT panel extracts energy from the air, from sun and from daylight. Heating with Triple Solar PVT panels is the sustainable and maintenance free solution for fossil free heating.

()

Mechanical Features

Cell Type

166*83 Mono

No. of Cells

144(6*12)*2

Dimensions

2094*1038mm

Weight

37.5kg

Front Glass

3.2mm high transmission, low iron, tempered glass

Frame

Anodized Aluminium Alloy

Junction Box

IP68 3 diodes

Output Cables

4mm² cable 30cm+mc4

Max Wind Load/Snow Load

2400Pa/5400Pa

Specification Sheet

STC: Irradiance 1000 W/m², AM 1.5, Gand Cell Temperature of 25℃

Module Type

M16Ensun

Heat Generation(W)

1200

Peak Power(Pmax)

450.00

Maximum Power Voltage(Vmp)

41.50

Maximum Power Current(Imp)

10.85

Open Circuit Voltage(Voc)

49.30

Short Circuit Voltage(Isc)

11.60

Cells Efficiency(%)

23.36

Module Efficiency(%)

20.70

STC: Irradiance 800 W/m², AM 1.5G, Ambient Temperature 20℃, Wind Speed 1m/s

Peak Power(Pmax)

336.00

Maximum Power Voltage(Vmp)

38.60

Maximum Power Current(Imp)

8.70

Open Circuit Voltage(Voc)

46.20

Short Circuit Voltage(Isc)

9.38

Inlet and Outlet

DN 15

Water Pressure

0.8mpa

Water Flow

0.4L/S

Temperature Characteristics

NOCT Nominal Operating Cell Temperature(℃)

45±2

Pmax Temperature Coefficients(W/℃)

-0.350%

Voc Temperature Coefficients(V/℃)

-0.270%

Isc Temperature Coefficients(A/℃)

+0.048%

PVT Operating Conditions

Maximum System Voltage(V)

1500

Maximum Series Fuse Rating(A)

20

Power Tolerance

0~+3%

Operating and Storage Temperature(℃)

-40~+85

PVT Certification

IEC61215, IEC61730, ISO900I:2008 TUV CE ISO SON PV CYCLE

Quality Warranty

quality assurance for 10 years,

90% power output for 12 years,

80% power output for 25 years.

Payment Term

30% deposit,

70% balance to pay before containers arrive in the destination port.

T/T, L/C, cash, and Alibaba assurance payment are acceptable.

COMPONENTS

5 (1)

Storage Tank - with non pressure type and high pressure type

5-

Controller with digital function

20- (1)

Water Pump-lift should be over 20miter

20- (2)

Bracket -optional as per your need

20- (3)

Electric Heater -optional 6kw 9kw 12kw 20kw

20- (4)

Inverter -optional as your need.

Client can purchase in local market if available

20- (5)

FAQ

1.Where is your factory located?

In Haining City,Zhejiang Province,China.

about 2 hours drive from shanghai airport

about 1 hour drive from hangzhou airport

2.When did your factory established?

Since 2009 , in 2020 we are running 2 factories both non pressure and high pressure

3.What is your main market?

North America, South America, Africa and Middle East

4.How many square meters of your factory?

More than 30000 square meter.

5.How many workers in your factory?

20 workers in office

80 workers on production line.

6.What type of your product?

Ensun Solar is top manufacturer and exporter of solar water heater

7.Where is your product use in?

Solar farm

hot water system

hot air heating

homeuse solar water heating

8.Can you customize for clients?

Yes, we can customize as your need, we have R&D department,

our designers can make design for you and our technicians make prototype.

9.Do you have booth in shows?

Yes, we have booth in every Canton Fair and online Canton Fair

Also some oversea exhibitions in Asia, America and Africa.

10.What is the delivery time for mass production?

Normally 14 days after deposit

It is negoticable as per client container plan

PVT collectors combine the generation of solar electricity and heat in a single component, and thus achieve a higher overall efficiency and better utilization of the solar spectrum than conventional PV modules.

Utilization of solar spectrum of a PVT collector

Photovoltaic cells typically reach an electrical efficiency between 15 % and 20 %, while the largest share of the solar spectrum (65 % - 70 %) is converted into heat, increasing the temperature of PV modules. PVT collectors, on the contrary, are engineered to transfer heat from the PV cells to a fluid, thereby cooling the cells and thus improving their efficiency.In this way, this excess heat is made useful and can be utilized to heat water or as a low temperature source for heat pumps, for example. Thus, PVT collectors make better use of the solar spectrum.

Most photovoltaic cells (e.g. silicon based) suffer from a drop in efficiency with increased cell temperatures. Each Kelvin of increased cell temperature reduces the efficiency by 0.2 – 0.5 %.Therefore, heat removal from the PV cells can lower their temperature and thus increase the cells' efficiency. Improved PV cell lifetimes are another benefit of lower operation temperatures.

This is an effective method to maximize total system efficiency and reliability, but causes the thermal component to under-perform as compared to that achievable with a pure solar thermal collector. That is to say, the maximum operating temperatures for most PVT system are limited to less than the maximum cell temperature (typically below 100°C). Nevertheless, two or more units of heat energy are still generated for each unit of electrical energy, depending on cell efficiency and system design.

We believe in the management rule that first-class 192VDC 50A PWM Solar Panel Battery Intelligent Regulator Controller come from endless innovation, and constantly develop and improve the technical innovation ability of the enterprise. We firmly believe that through the unremitting efforts of us and our customers, a bright tomorrow will definitely belong to us! We are committed to continuously meet the different needs of our customers by launching meaningful innovations in a timely manner.

Send Inquiry

whatsapp

Phone

VK

Inquiry